How To Choose An Outboard Motor For Your Boat

There’s nothing better than launching your boat into the lake early in the morning in search of a morning catch. Those who like fishing and boating look forward to the season’s peace. A boat may go from A to B or just to have a leisurely trip on the water for others.

So, if you are looking for a quiet and uncomplicated outboard motor for your boat, here are some considerations that you need to pay attention to. So, let’s explore how to choose an outboard motors for your boat.

1. Find The Plate’s Capacity

Your boat must have a Coast Guard-issued capacity plate showing how much horsepower and weight it can safely carry.

Typically, the capacity plate is positioned in the stern of the boat and adhering to the horsepower restriction is critical for safety reasons. If your boat is overpowered, it will capsize and sink with the motor at the stern. You don’t need a high-powered motor if you’re merely going to moor your boat in a quiet bay or if you’re going to go through weed-filled creeks.

2.  Choosing Horsepower

Decide on the mid-range, which is between 2.5 and the maximum horsepower specified on the capacity plate for your boat.  Mid-range horsepower for a 20-hp boat is 11.25 hp or 11.25 percent of the maximum. Even so, it’s unlikely that you’ll be able to obtain an outboard motor with an 11.25 horsepower rating.

3. Weight Considerations

There is a limit to how much weight you and your gear can cram into your boat. You’ll need to take a second look at your vessel’s capacity plate to determine how much weight you can put on it. You may find out how much weight your capacity plate can hold in various methods. The maximum number of passengers accommodated on your boat will be shown first, in bold letters and figures.

4.  Choose The Right Shaft Length

If you want to know how long your boat’s shaft should be, get a tape measure and measure the height of the stern from the top to the bottom in the center. The shaft should be at least two inches longer than this. It’s not a massive issue if you’re an inch off. However, if you lose more than 5 inches, you’re in trouble.

5.  Tilt-Assist Function

Driving a tiny boat through shallow water, a power tilt is a must-have feature. This is especially true for those who have a 15 or 20-horsepower motor on their boat.

Every time you travel over a rock bed or sand bar, you must manually tilt your motor out of the water. Thanks to the power tilt feature, your arm and shoulder may be freed up for fishing, hunting, or just relaxing in the great outdoors.

Some Other Considerations

Additionally, while choosing a motor for your boat, keep in mind how you want to use it. Is it something you plan to use every day? Because of this, if your boat has an outboard, you’ll probably keep it in place and not worry about it.

Outboard motors must be removed and stored between usage if the boat will be used on a weekly or monthly basis. It will be simpler to pull a lightweight motor onto and off the transom.

To avoid drifting too far in the wind, a little extra power might help you stay on course, traveling from point A to point B faster and more effectively. Finally, less horsepower may be required if the boat is typically used to cruise a calm lake.